"Please Read" Shipping | Backlighting | Mounting

Homepage//"Please Read" Shipping | Backlighting | Mounting


Shipping Crosses

  • All Prices Include Shipping In The 48 Mainland U.S. States.
  • Note: Products shipped outside the 48 mainland U.S. States require additional shipping charges. Custom Ordering Form
  • We ship with USPS, UPS, and Estes Freight based on the weight and size of box.
  • All cross products are custom built in King William, Va after ordering.


Ready to ship time is approximate - Could vary based on quantity ordered.

  • 1 to 2 weeks for smaller crosses / 8" - 24"
  • 2 to 6 weeks for larger crosses / 36" - 120"
  • 4 to 6 weeks for Altar floor crosses - Pulpit crosses.

Shipping Carriers

  • Wall Crosses 8" to 16" ships USPS or UPS.
  • Wall Crosses 20" to 60" ships UPS.
  • Wall Crosses 72" to 120" ships Estes Freight.
  • Table Crosses 8" to 24" ships USPS or UPS.
  • Altar floor and pulpit crosses ship UPS or Freight.

Important Freight Delivery Information (For Crosses 72" to 120")

  • No Residential Delivery: We do not ship large freight items to residential addresses.
  • Delivery Location Options: All freight shipments must deliver to a church or a commercial business address.
  • Terminal Pickup Option: Customers also have the option to pick up their order directly at their local Estes Freight terminal.
  • Prepaid Fees: We handle all standard freight charges.


Backlighting Crosses

  • LED Rope Light: Added in 2024, offers long-lasting brightness and minimal maintenance.
  • Indoor - Outdoor LED rope light has a durable lifetime of up to 50,000 hours
  • Incandescent Soft Glow Rope Light: Used on our 36" Tapered Beveled Crosses and our Traditional Wooden Crosses With Stained Glass Center Cross because of limited space for the LED Transformer. Used on all of our crosses prior to July of 2024. Less burn hours than LED
  • Note: Previous customers who purchased our Incandescent Soft Glow Rope Light except for the 36" Tapered Beveled Crosses and our Traditional Wooden Crosses With Stained Glass Center Cross will need to order the 3/8" LED Cool White. The mounting track is for the 3/8" round rope light. If the mounting track you have is 1/2 inch it is probably to large and we can supply the 3/8" replacement track. You may also need some clips that go on the outside four ends of the cross and inside corners that we started using that may not be on many of the older crosses we sold. When replacing the rope light, you will need to take a few photos of the back of cross before removing rope light as a guide to reinstalling. We also have photo that are sent with the clips being used. We recommend having an electrician install the new track and rope light if needed.
  • Call us with your cross size and we will figure what supplies you will need and the cost to replace the rope light.
  • Note: Power cord and plug is attached to back of cross in the center of the crossmembers to plug into a receptacle or use with an extension cord. Contact us to let us know where the receptacle will be located.
  • Very Important: Rope light should be replaced or turned off when any rope light bulbs are burned out.
  • Note: We recommend always having a backup section of rope light for quick replacement.
  • Accent Lighting: Is used instead of backlighting to shine on the cross and is especially useful with large heavy crosses by not having to remove from wall to replace the backlighting. View crosses with Accent Lighting
  • Order Replacement Rope Light


Mounting Crosses

    🛠️ Pre-Purchase Installation Requirements
    Because our solid hardwood crosses are premium, substantial structural pieces, please review the following requirements before ordering:
    • Indoor Use Only: Designed strictly for climate-controlled, indoor environments.
    • Mandatory Stud Anchoring: Due to the weight (8 lbs up to 125 lbs depending on size), these crosses MUST be anchored directly into solid wood wall studs.
    • Drywall Anchor Ban: Do not attempt to hang this product using drywall anchors, plaster toggles, or hollow wall fasteners.
    • Team Lift Required: Larger custom sizes require multiple capable people to lift, plumb, and hold the cross during alignment and final installation.
    • Required Tools: You will need an electronic or magnetic stud finder, bubble level, manual hand screwdriver, socket/wrench set, pencil, and a tape measure.
    📦 A custom-engineered, heavy-duty aluminum bracket matching system and premium fasteners are included with your order. Some crosses are optional single mount that come with one mounting lag screw. A complete step-by-step physical recommended manual will ship inside the box, and a digital copy will be emailed to you immediately after purchase.

    ⚖️ Legal Hold-Harmless Disclaimer
    Crossmember Crosses operates strictly as the product fabricator. By proceeding with the installation of this product, the buyer, installer, or contracting entity accepts absolute liability for evaluating the structural integrity of the chosen mounting surface and executing the final physical assembly. The manufacturer assumes zero liability for injuries, structural collapse, or property damages resulting from improper placement, field hardware substitution, failed studs, or failure to follow these written safety protocols.


    Crossmember Crosses

    All Rights Reserved ©

    2005 - 2026

    • Create Account Sign In
    • Track Orders
    • Shopping Chart
    Powered by Lightspeed
    Display prices in:USD
    Skip to main content
    Crossmember Crosses
    Homepage
    Cross Products - Store Categories
    Contact Us
    About Us
    Ministry
    Policies
    Shipping
    International Ordering
    Menu